Diagonal

Measuring stand MS-10

5.99 kg per corner

Measuring stand MS-10 from the hub side: hub plate with bolt circle and eight M8 threads, carrier plate, measuring head, below them floating plate, load plate, load cell and base plate on three levelling feet
Hub side, hub 200, bolt circle

Specifications

QuantityValue
AccuracyTarget
Wheel load± 0.1 kg
Camber± 0.05°
Toe± 0.05°
Stand
MeasuredWheel load, axle load, cross weight, camber, toe per wheel
Load cell200 kg C3
Overload stop130–150 kg
Working load3 kN per stand
Mass per corner5.99 kg: stand 4.01, adapter 1.46, measuring head 0.52
Battery≥ 10 h, USB-C
Interface
Wheel interfaceBolt circle 4 × 100 or centre lock, hub plate per car
Carrier plate hub 200Hub height 190–210 mm
Carrier plate hub 225Hub height 215–235 mm
Carrier plate hub 255Hub height 245–265 mm
Height slide± 10 mm, 0.1 mm per graduation
Float travel± 12 mm radial, 4 ball transfer units, 120 kg each
Pendulum travelCamber ± 4°

18.4 mm clearance to brake disc Ø200

Slide −10: 9.9 mm

Height above ground in mm, hub 200, slide 0
Measuring head285.0 – 355.0
Hub centre200.0
Fork block, top185.0
Pendulum axis140.0
Carrier plate, arm underside122.0
Bearing block, top106.4
Floating plate92.8 – 98.8
Stop bushing, top97.0
Ball transfer units, top92.8
Load plate75.0 – 83.0
Load cell33.5 – 73.5
Base plate22.0 – 32.0
Across the hub in mm
Load axis outboard of hub flange72.0
Floating plate inboard, lateral clearance to brake disc7.0