Bill of materials
Measuring stand MS-10, 36 items
Items
| Item | Part number | Description | Material | Type | Qty |
|---|---|---|---|---|---|
| Base plate and weighing | |||||
| 10 | MS10-110 | Base plate | EN AW-6082 | M | 1 |
| 20 | MS10-115 | Spacer plate, fixed end | 1.4301 | M | 1 |
| 30 | MS10-120 | Levelling foot: set screw DIN 6332-M12-50 with thrust pad DIN 6311-25-S | – | P | 3 |
| 40 | MS10-210 | Load cell 200 kg C3 | – | P | 1 |
| 50 | MS10-220 | Load plate | EN AW-7075 | M | 1 |
| 60 | MS10-225 | Spacer plate, load end | 1.4301 | M | 1 |
| 70 | MS10-235 | Stop bushing, float travel | Steel | M | 1 |
| 80 | MS10-240 | Ball transfer unit 120 kg | – | P | 4 |
| 90 | MS10-245-F | Index bushing, fixed bearing: drill bushing DIN 179 A 6.0×10×16 | – | P | 1 |
| 100 | MS10-245-L | Index bushing, floating bearing: drill bushing DIN 179 A 6.5×12×16 | – | P | 1 |
| 110 | MS10-250 | Overload stop, set screw ISO 4026 M8×50 | Steel | P | 2 |
| Floating plate and pendulum axis | |||||
| 120 | MS10-310 | Floating plate | Hardox 500 | M | 1 |
| 130 | MS10-320 | Index plunger | – | P | 2 |
| 140 | MS10-360 | Bearing block | EN AW-7075 | M | 1 |
| 150 | MS10-370 | Deep groove ball bearing 6201-2Z | – | P | 2 |
| 160 | MS10-380 | Shaft, pendulum axis Ø12 j6 | Steel | P | 1 |
| 170 | MS10-385 | Spacer sleeve | EN AW-7075 | M | 2 |
| Carrier and hub | |||||
| 180 | MS10-410-10 | Carrier plate hub 200 | EN AW-7075 | M | 1 |
| 190 | MS10-415 | Fork block | EN AW-7075 | M | 1 |
| 200 | MS10-420 | Height slide | EN AW-7075 | M | 1 |
| 210 | MS10-425 | Fine adjustment screw M10×1×34 with knurled head | Steel | M | 1 |
| 220 | MS10-427 | Thrust pad DIN 6311-20-S | Steel | P | 1 |
| 230 | MS10-430-LK | Hub plate | EN AW-7075 | M | 1 |
| Measuring head | |||||
| 240 | MS10-505 | Head plate | EN AW-7075 | M | 1 |
| 250 | MS10-510 | Measuring head housing with electronics | PA12 | A | 1 |
| 260 | MS10-530 | Camera target with diffuser | PA12 | A | 1 |
| Standard parts | |||||
| 270 | ISO 4762 M8×20 | Socket head screw, standard bracket to hub plate | Steel 8.8 | S | 4 |
| 280 | ISO 7089 8 | Washer for M8 | Steel 200 HV | S | 4 |
| 290 | ISO 10642 M8×25 | Countersunk screw, fork block to carrier plate | Steel 10.9 | S | 2 |
| 300 | ISO 8734 6×16 | Dowel pin, fork block | Steel, hardened | S | 2 |
| 310 | DIN 7984 M6×14 | Low head socket screw, bearing block | Steel 8.8 | S | 4 |
| 320 | ISO 4762 M6×20 | Socket head screw, load cell fixed end | Steel 8.8 | S | 2 |
| 330 | ISO 4762 M6×20 | Socket head screw, load cell load end | Steel 8.8 | S | 2 |
| 340 | ISO 7380-1 M3×8 | Button head screw, ball transfer unit | Steel 10.9 | S | 12 |
| 350 | ISO 8734 6×12 | Dowel pin, head to standard bracket | Steel, hardened | S | 2 |
| 360 | M5×20 | Captive knurled screw, measuring head | Steel | S | 2 |
| Total per corner, 5.99 kg | 71 | ||||